INNGRIT zero point clamp

Revolutionalizing Zero Point Clamping Technology

Clamping And Positioning

Drawbacks of Other Brands

INNGRIT

  • Damaged taper plane or deviation in chuck spacing will result in inaccuracy
  • Wear to the pin and taper surface will result in inaccuracy
  • Inngrit boasts a patented Automatic Compensation Correction System(ACCS).
  • ACCS compensates for deviations of studs within plus or minus 2 (± 0.02mm)
  • Automatically compensate for wear of positioning bolts
  • ACCS allows for each axis to be fixed to the origin position, regardless of the absolute clamping force in any direction.
  • In the event the reference plan is damaged, it can be reground up to 0.5mm

Other Brands

INNGRIT​

Studs Arrangement

Drawbacks of Other Brands

INNGRIT

  • Requires 3 different types of clamping studs
  • The lower left corner is the origin clamping position, the lower right is the clamping position, and the upper parts are floating pins. These compensate for tolerances, however results in insufficient lateral force
  • Uses a single type of clamping stud
  • Low cost, high quality, easy maintenance

INNGRIT's Internal Floating Ejector

  • Inngrit zero point chucks boast a state-of-the-art “Internal Floating Ejector” that facilitates easy removal of the workpiece after milling operations

Chuck Cleaning Technology

  • Inngrit Zero Point Clamping System boast a tornado-type air cleaning system  which ensures that both the  chucks are cleaned prior to the start of  a new milling operation

Air Cleaning Technology

  • Inngrit zero point chucks boast an air cleaning system  which ensures that both the reference surface is cleaned prior to the start of  a new milling operation

en_USEnglish
zh_TWChinese en_USEnglish